All-Electric Homes Program

The All-Electric Homes program offers rebates and bonus incentives to PSEG Long Island approved developers and contractors building single-family all-electric homes or converting existing single-family residences from fossil fuel heating equipment and appliances to all-electric in the PSEG Long Island territory. The All-Electric Homes program requires the installation of whole-house heat pumps, electric water heating, and electric energy efficient appliances. All required equipment must be installed to participate in the program and to be eligible for bonuses.

Rebate Application
Please see the All-Electric Homes application for all required equipment, bonus tiers, and eligibility requirements.

• Download the All-Electric Homes application
• Submit application through the Lead Partner Portal

Geothermal Rebate

In the winter, heat is absorbed from the ground or groundwater and carried to the geothermal unit via an underground piping system or well. The heat is transferred to the air, which is distributed through duct work (similar to that used in any forced air heating system). In the summer, the unit provides central air conditioning by ejecting heat from your home. A portion of the heat can be used to produce hot water, while the remainder is pumped back to the underground piping or well system, where it harmlessly dissipates into cooler ground/water. Our rebate is based on the unit’s Energy Efficiency Ratio [EER] rating. Geothermal units must be independently verified through the current Air Conditioning and Refrigeration [ARI] directory as performing to our Efficiency standards.

Rebate Application

• Download the Geothermal rebate application
• Submit application through the Lead Partner Portal

Green Building and Technical Assistance (TA) Rebates

These green structures are built to use resources efficiently while reducing environmental impact throughout their whole lifecycle: from planning and construction to renovation or demolition. Contractors, architects, engineers, and clients collaborate closely during the project to ensure that the Green Building practice expands and complements the classical building design concerns of economy, utility, durability, and comfort.

Rebates or Green Buildings and Technical Assistance are both offered through PSEG Long Island’s Technical Assistance Program. To begin the rebate process:

• If you are not already working with a qualified Technical Assistance (TA) firm, choose one from our qualified list.
• If your firm is not qualified with PSEG Long Island, have them complete the TA Efficiency Partner Application.
• Required documents are found in the applicable rebate application
• A PSEG Long Island representative will follow up with you and work with you throughout the course of the study.

Rebate Application
Prior to obtaining Technical Assistance (TA) service, please complete one of the following applications for your project and email it and any required documents to cepli@pseg.com.

• Download the Technical Assistance ENERGY STAR Rebate Application
• Download the Technical Assistance Engineering Study Rebate Application
• Download the Technical Assistance LEED Rebate Application
• Download the Technical Assistance Whole Building Application
• Submit application through the Lead Partner Portal

HVAC Rebates

PSEG Long Island offers robust HVAC rebates to help offset the cost of upgrading old, inefficient equipment.

To begin the rebate process:

• Complete the HVAC Interactive Rebate Application and submit it through the Lead Partner Portal or email it, along with all Required Documents listed in the application, to cepli@pseg.com.
• It is important to obtain a pre-approval letter prior to purchasing or installing equipment to ensure that your project qualifies.

Once you've received the pre-approval letter and finished your project, complete the Post Project Completion Certification form and send it, along with all Required Documents to the CEP mailbox at cepli@pseg.com. From there, a PSEG Long Island representative will conduct a post-inspection and work with you to validate the project for payment.

Lighting Rebates

Lighting can improve sales, productivity, and modernize your space. And by the way, they also save money and energy. PSEG Long Island offers rebates for lighting upgrades, and the application process is designed to meet the needs of your business. If you have any questions regarding any of the following lighting applications, please refer to the FAQs document.

To begin the process:
The Comprehensive Performance Lighting program is available for all commercial customers, including all public and private K-12 schools. 

• Complete the Comprehensive Performance Lighting Rebate Application and submit it through the Lead Partner Portal or email it, with all Required Documents listed on the application to cepli@pseg.com.
• It is important to obtain a pre-inspection of existing conditions and pre-approval letter prior to purchasing and installing the equipment to ensure that your project qualifies.

Once you've received the pre-approval letter and finished your project, complete the Project Completion Certification form and email it, along with all Required Closing Documents to the CEP mailbox at cepli@pseg.com. From there, a PSEG Long Island representative will conduct a post-inspection and work with you to validate the project for payment.

Also available when a quicker timeline is desired:

The Fast Track program component is available for all commercial customers and is implemented through our Prime Efficiency Partner network. The Fast Track program is limited to projects with an estimated rebate value of under $5,000.

To begin the process:

• Select a Prime Efficiency Partner from our list.
• You are not required to have a pre-inspection or a pre-approval 

  
Information on rebate values and eligibility requirements can be found on our Fast Track LED Eligibility and Rebate Table. Rebates are available for products purchased within 90 days of application submittal:

• Interior parking garage lighting fixtures
• LED lamps, downlight, linear panels, replacements
• LED retrofit kits for luminaries
• LED high and low bay fixtures

Outdoor Lighting Rebate

The Commercial Efficiency Program offers rebates to commercial, industrial, educational, municipal, or multi-family building customers who install qualifying energy efficient equipment. This applications is to be used for Outdoor Lighting rebates for Rate 280, 281, 285 accounts. Rebates require pre-approval. 

Rebate Application

• Download the Outdoor rebate application
• Submit application through the Lead Partner Portal

Multi-Family Rebate

The development of New Construction Multi-Family properties is on the rise. Multi-Family buildings, in comparison to Single Family homes, use more energy per square foot of living space. Developers can invest in basic, yet cost effective performance upgrades to significantly reduce energy costs. With so much energy savings at stake, creating energy efficient properties is a smart move for developers and benefits the building residents.

To begin the rebate process:

• Complete the Multi-Family Rebate application
• Collect all required document listed in the application
• Submit the application through the Lead Partner Portal or email it, and all required documents, to cepli@pseg.com

 
Information on rebate values and eligibility requirements can be found on our Multifamily Eligibility and Rebate Table. It is important to obtain a pre-approval letter prior to purchasing or installing equipment to ensure that your project qualifies. If you have any questions regarding the Multi-Family application, please refer to the FAQs document

Refrigeration Rebates

PSEG Long Island offers robust refrigeration rebates to help offset the cost of upgrading inefficient equipment.

To begin the rebate process:

• Complete the Refrigeration Rebate Application
• Submit the application through the Lead Partner Portal or email it, and all required documents, to cepli@pseg.com
• It is important to obtain a pre-approval letter prior to purchasing or installing equipment to ensure that your project qualifies.

 
Once you've received the pre-approval letter and finished your project, complete the Post Project Completion Certification form and send it, along with all required documents to the CEP mailbox at cepli@pseg.com. From there, a PSEG Long Island representative will conduct a post-inspection and work with you to validate the project for payment.

Water Heater Rebates

Energy efficient heat pump water heaters and electric tankless water heaters can help commercial customers and multifamily buildings save energy and save money over the lifetime of the system.

Water Conservation Rebates

Water conservation measures such as pre-rinse spray valves and low-flow faucets/aerators can additionally help electric water heating customers save energy by reducing the total hot water use within a facility.

To begin the rebate process:

• Complete the Water Heating and Conservation Rebate Application
• Submit the application through the Lead Partner Portal or email it, and all required documents, to cepli@pseg.com
• It is important to obtain a pre-approval letter prior to purchasing or installing equipment to ensure that your project qualifies.

 
Once you've received the pre-approval letter and finished your project, complete the Project Completion Certification form and email it, along with all Required Closing Documents to the CEP mailbox at cepli@pseg.com. From there, a PSEG Long Island representative will conduct a post-inspection and work with you to validate the project for payment.

Weatherization Rebates (Commercial)

PSEG Long Island offers robust weatherization rebates to ensure your building is sealed, comfortable, and energy efficient.

To begin the rebate process:

• Complete the Commercial Weatherization Rebate Application
• Submit the application through the Lead Partner Portal or email it, and all required documents, to cepli@pseg.com
• It is important to obtain a pre-approval letter prior to purchasing or installing equipment to ensure that your project qualifies

  
Once you’ve received the pre-approval letter and finished your project, submit a completed Post Project Completion Certification Form and send it, along with all required documents to the CEP Mailbox cepli@pseg.com . From there, a PSEG Long Island Representative will conduct a post-inspection and work with you to validate the project for payment.

Rebates for Other Energy Saving Projects

Standard rebates are available to all Commercial customers who replace old, inefficient equipment with new, qualifying equipment. Standard rebates are available for efficient electric equipment and beneficial electrification equipment:

Standard Rebates
Download the Standard Rebate Application for any one of the following:

• Compressed Air
• Battery Operated Lawn Care Equipment
• Battery Operated Non-Road Electric Vehicles
• Elevator Modernization 
• Kitchen Equipment
• Pool Equipment
• VFDs

  
Submit the application through the Lead Partner Portal or email it, and all required documents, to cepli@pseg.com

Custom Performance Rebates
Customer rebates are available to all Commercial customers who install qualifying electric energy efficiency or beneficial electrification equipment. Download the Custom Performance Rebate Application for any of the following:

• Chillers
• Chiller Plant Optimization
• Data Centers
• Whole Building Heat Pumps
• VRFs
• "Other” Custom Measures

  
Submit the application through the Lead Partner Portal or email it, and all required documents, to cepli@pseg.com

Revamping your business to include more energy-efficient equipment and processes that are not listed? Talk to an experienced PSEG Long Island Energy Consultant or Project Engineer who will help you through the project process and recommend energy saving solutions. Contact us at cepli@pseg.com, or call our Energy Efficiency Infoline at 1-800-692-2626 for more information.