Commercial Solar Feed-in Tariff III
Feed-In Tariff III - 20MW
Feed-In Tariff for Interconnection of Solar Photovoltaic Resources Mounted on Commercial Customer Rooftops or Carports from 200 kW up to less than 1000 kW
The LIPA Board of Trustees met and approved the Commercial Solar Photovoltaic Renewable Resources Feed-in Tariff III on September 21st, 2016.
Program Update: During the initial four-month application period that ended on January 31, 2017, the Authority received 21 project applications from 12 separate entities, representing 13.367 MW of solar energy. Following a comprehensive analysis, a price of $0.1649 per kWh was established as the clearing price to be offered to projects accepted into the Commercial Solar Feed-in Tariff III program.
Eighteen of the 21 project applications that were submitted during the initial application period had a bid price at or below the clearing price and were accepted into the program. The remaining 3 applications, which had a bid price above the clearing price were placed on the Wait List. Additional applications were received after the January 31, 2017 deadline and were, per the Tariff, also placed on the Wait List. All projects on the Wait List were offered the clearing price and subsequently accepted into the program. If constructed, these solar photovoltaic systems will provide 18.158 MW of clean, renewable energy, which can produce the energy required for approximately 2,900 homes.
In accordance with the Tariff, the Authority is continuing to accept additional responsive applications to this program. New applications will be placed on the Wait List in the order that they are received. Any project selected from the Wait List will be offered the clearing price.
The initial enrollment period of October 1, 2016 to January 31, 2017 has ended. However, the Authority will continue to accept applications from eligible Generation Projects until February 1, 2019. For the duration of this enrollment period, all responsive bids that have not been accepted into the Commercial Solar Feed-in Tariff III during the initial enrollment period nor withdrawn by the Generation Project owner will be placed on the Wait List. Applications submitted after January 31, 2017 need not include a proposed price.
Project information will be added as PPAs are executed.
Eligible generation to the Commercial Solar PV Resources FIT III is limited to solar photovoltaic (PV) systems that generate electricity directly from sunlight. Additionally, successful candidates must be mounted on the roof of a non-residential Customer’s building or structure; or a non-residential Customer’s carport that is used to shelter motor vehicles. The carport must be installed over a paved parking area composed of asphalt, concrete, or similar permanent material. Additional requirements include:
- Eligible Generation Projects must be connected directly to the Authority’s distribution system with a dedicated meter.
- Eligible PV systems are required to use smart inverters that conform to the Authority’s technical interconnection requirements.
Generation Projects that qualify under and satisfy all the requirements of this Tariff, including the Smart Grid Small Generator Interconnection Procedures (“Smart Grid SGIP”), with a minimum output of 200 kW and maximum output of less than 1,000 kW, and will enter into a Solar Power Purchase Agreement for the Solar Feed-in Tariff III (the "Power Purchase Agreement").
Additional eligibility requirements apply. Careful review of the Commercial Solar PV Resources FIT III document is advised to see all eligibility requirements.
Applicants are instructed to complete the “FIT III – Application Cover & Appendix” and submit their bids electronically to PAMfitLI@pseg.com. Applicants should receive an email acknowledging receipt of their application within three (3) business days. The application fee of $1,000 must be in the form of a certified check payable to PSEG Long Island and should be delivered within three (3) business days of application submittal at the following address:
PSEG Long Island
ATTN: Stephen Cantore, Power Asset Management
175 E. Old Country Road
EOB, 2nd Floor
Hicksville, NY 11801
Applicants should carefully review the Commercial Solar PV Resources FIT III document and all other related information provided on this webpage. We have compiled a list of Frequently Asked Questions to serve as guidance. Any additional questions may be submitted to: PAMfitLI@pseg.com.
- FIT III - Application Cover & Appendix
Adobe Acrobat Reader is recommended for viewing and completing the application. The latest version of Adobe Acrobat Reader can be downloaded for free at https://get.adobe.com/reader/.
- Commercial Solar PV Resources Feed-in Tariff III - Clean version
- Commercial Solar PV Resources Feed-in Tariff III - Redline version
This document highlights the changes to the approved tariff versus the proposed tariff that was published in the State Register on May 18, 2016, in accordance with the NY State Administrative Procedures Act (SAPA).
- FIT III - Power Purchase Agreement - Clean version
- FIT III - Power Purchase Agreement - Redline version
This document highlights the changes to the FIT III - Power Purchase Agreement - Clean version listed above versus the FIT III - Power Purchase Agreement document that was posted on the website back in May 2016.
- FIT III - Injection Capability Interactive Map
This link provides information regarding the relative degree to which LIPA Distribution substations currently can accept capacity from DG resources: Green reflects favorable conditions for interconnections, Yellow moderate conditions, and Red saturated conditions.